M-300 Remote is an application for remotely controlling the Roland M-300 V-Mixer live mixing console. ●This applications makes it possible to adjust mixing parameters from a variety of listening points on stage or around the room, away from the M-300 positioned at a fixed location. ●Combined with the easy operation afforded by the iPad's large screen and Multi-Touch interface, this application makes it easy to remotely view and adjust settings. ● It is also equally useful as a sub-display and controller when placed beside the M-300 V-Mixer. Controllable parameters: [Channel] - Preamp Gain - Pan - Solo - Mute - Fader - Sends on Fader - 4-Band Parametric EQ and HPF - EQ Copy/Paste/Undo [Bus] - Pan - Solo - Mute - Fader - 8-Band Parametric EQ - EQ Copy/Paste/Undo [Other] - 31 Band Graphic EQ - GEQ Copy/Paste/Undo - Solo Clear - Scene Recall/Store/Clear Viewable-only parameters: [Channel] - Phantom Power Status - Pad Status - Gain Reduction on Gate - Gain Reduction on Compressor - Name and Color - Meter [Bus] - Gain Reduction on Gate - Gain Reduction on Compressor - Name and Color - Meter [Other] - Scene Lock/Filter/Fade Status - Meter Overview Important notes: *Use with the most recent firmware version of the M-300. *A wireless USB adapter (Roland WNA1100-RL) is required. *A Wi-Fi router (wireless LAN router, etc.) is recommended but if not available, connection can be made directly to the wireless USB adapter in ad-hoc mode. *Because the wireless USB adapter occupies the M-300's USB port, functions that use a USB flash key (such as recording, playback, and backing up settings) are not possible while the wireless USB adapter is connected. *A single iPad can be connected at one time. This application cannot be used concurrently with the M-300 RCS PC/Mac remote application software.